Today I am going to introduce VOOPOO DRAG 157W Resin Version.

If there is something different from the previously released device, this is the resin version!

I have already reviewed the device performance part last time, and this time, I will make a short comparison in terms of design.

It is a figure that I subtracted all the products. The first thing that comes into your eyes is dragging resin mode!

In the photo, the resin color is just blue-black, but the color is actually brighter.

Silver is also mixed, but it is so silver, it mixes well and the color is very good.

I changed the design that I chose as the most unfortunate point when I reviewed the drag before!

The colors of VOOPOO DRAG 157W are random, but they are divided into green/purple / red series.

I was so nervous that I was too gorgeous, but I personally like the colors too.

I am a little bit calibrated so it looks a lot like the actual color. There is something deeply embedded in the pattern.

So let's compare the previous devices that came with the carbon fiber version and the devices that came with the resin version.

Performance & functionality as well as size is not changed at all.

One of the most noticeable differences is that the VOOPOO DRAG 157W resin is in place for carbon fiber.

The design is a little different, but it looks much more luxurious.

DRAG without any difference on the back is written as large.

Since this side is the battery door, put the fingernail in the lower center and lift it up to open the cover.

When you open the battery cover, things start to look slightly different.

There are a few things that are very minor but definitely different. Have you found everything?

1. Battery sticker

Stickers with battery notes are not visible on resin products.

2. Battery contact part

Battery contact area at the bottom of the unit is slightly smaller. It's a very small change, but it helps a lot when you put the battery out. 

The upper engaging portion protrudes more so that the battery is more securely fastened.

3. Battery Strap

The fonts on the straps that made the battery easier to remove have changed.

Unlike previous designs, V and P are changed to bold to give points,

It turned into a more rounded font.

The carbon fiber on the left is the resin version on the right.

The shape that looks like a volleyball is perfectly the same without one thing.

However, I found another point on the 510 pin.

The carbon fiber version of the pin was spring loaded and moved up and down,

The resin version of the pin is very stiff and does not work well.

Is that so? When the machine is tightened, there is a slight gap between the machine and the machine.

Of course, if you force it,

It looks like the 510 pin does not fit well inside.

The ventilation hole is the same, but the writing is a little different.

GENEVAPE I wrote it out loud.

The funny thing is that the company logo is VooPoo, but on the underside of the device, p is in lower case Voopoo.

It's not a problem, but it would have been better if I wrote VooPoo in capital letters.

The front of the device. The size is the same, and both the screen and the USB port have the same design

However, when you look at the buttons, you will see a difference from the carbon fiber version.

The fire button maendeul maendeul the fire button on the haetneundae resin version of the joystick is designed like a hollow carved in the middle of Magna.

You made your fingers less slippery, right?

And the + and - buttons also seem to be different.

It was something of a matte material like the body of the device, but the resin version is made of a more shiny material that differs from the body color.

Firebug matt finish Well I wonder why the buttons below are polished.

It is the Azeroth RDA contract. If you look closely, there is a glare in the instrument and the projector.

This is all because of the 510 pins.

But thanks to the resin, I feel like I have a lot of fine jeans.

If you have been reluctant to buy because of the carbon fiber design, try this one time with a resin.

It's too good to be true.

Click on the link below to go to the VOOPOO DRAG 157W resin version page:

https://www.elegomall.com/product/voopoo-drag-157w-tc-box-mod-resin-version.html

Review Written by  Esta_Loca